10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
FITTING AND REMOVING THE DUST EXTRACTION SPOUT
1. Place two nuts in to the dust
extraction spout as shown.
2. Position the dust extraction spout
to the router as shown.
3. Use the screws provided to secure
the dust extraction spout.
OPERATION
CORRECT HAND POSITION
The correct way to hold the router
requires one grip in each hand as
shown.
SWITCHING ON/OFF
1. Grip the router with both hands,
ensuring the handle with the
trigger switch is in the right hand.
2. Push and hold the safety button,
and pull the trigger switch.
• Allow the motor to reach full
speed before use.
3. To stop the router, simply release
the trigger.
WARNING: THE BIT WILL CONTINUE TO ROTATE FOR SEVERAL SECONDS
AFTER THE TRIGGER IS RELEASED.
Summary of Contents for Contractor CR3
Page 20: ......
