8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SETUP
ADJUSTING THE SIDE HANDLE
1. Loosen the handle by rotating the
shaft of the handle clockwise
(when viewed from above)
2. Slide the handle assembly over
the chuck and onto the body of
the drill. (A)
3. Position the handle in the desired
position.
4. Secure the handle in position by
rotating the shaft of the handle
anticlockwise (when viewed from above), DO NOT overtighten.
FITTING THE DEPTH STOP
The depth stop is fitted within the side handle and can only be used if this
handle is fitted.
1. To set the depth stop, hold down
the depth stop adjustment button
and slide the rod in and out to the
required position
WARNING: TO REDUCE THE RISK OF PERSONAL INJURY, TURN THE UNIT OFF
AND DISCONNECT IT FROM THE MAINS SUPPLY BEFORE INSTALLING AND
REMOVING ACCESSORIES
Summary of Contents for CONRHD720
Page 16: ......
