6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
SPECIFIC SAFETY RULES
10. For your safety, do not plug in your power tool until you have read and
understood this Owner's Manual.
11. WEAR EYE PROTECTION. Use face or dust mask along with safety goggles if
operation is dusty.Use hearing protection, particularly during extended
periods of operation, wear safety shoes.
12. “Wear ear protectors with impact drills.Exposure to noise can cause
hearing loss”
13. DO NOT wear gloves, jewellery, neckties or loose clothing.
14. DO NOT drill material too small to be securely held.
15. ALWAYS keep hands out of the path of the drill bit. Avoid awkward hand
positions where a sudden slip could cause your hand to move into the path
of the drill bit.
16. SECURE WORKPIECE. Use clamps or a vice to hold the work when
practical.It is safer than using your hand and it frees both hands to operate
the tool.
17. MAKE SURE there are no nails or foreign objects in the part of the workpiece
to be drilled.
18. SDS Chuck for use with SDS Bits only.
19. Standard chuck should be used for normal (non hammer) drilling into
wood, metal or masonry
Summary of Contents for CONRHD720
Page 16: ......
