12
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
MAINTENANCE
BEFORE USE
1. Ensure all fixing screws remain tight to maintain a safe working condition.
2. Inspect the power cable to ensure it is sound and free from cracks, bare
wires etc.
CLEANING
1. Ensure all air ventilation slots are clear of blockages, (use compressed air to
clean the machine if possible).
2. After use, clean all dust and swarf from the drill.
3. Clean the exterior of the drill with a soft cleaning cloth. Never use any
chemicals or harsh abrasives to clean the tool.
• Avoid using solvents when cleaning plastic parts, most plastics are
susceptible to damage from the various types of commercial
solvents.
GENERAL MAINTENANCE
• All bearings etc, in this tool are lubricated with a sufficient amount of
high grade lubricant for the tools lifetime under normal operating
conditions, therefore no further lubrication is necessary
• Refer to your CLARKE dealer if internal maintenance is required.
INDICATORS
The
Green
indicator is a 'Power
present' indicator. This illuminates
when the product is plugged into a
live socket.
The
Red
indicator is a brush wear
indicator. It illuminates when the
motor brushes need replacing, Refer
to your clarke dealer.
WARNING: MAKE SURE THAT THE 5 FUNCTION ROTARY HAMMER DRILL IS
SWITCHED OFF AND DISCONNECTED FROM THE MAINS SUPPLY BEFORE
STARTING ANY CLEANING OR MAINTENANCE PROCEDURES.
Summary of Contents for CONRHD720
Page 16: ......
