13
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INSTRUCTIONS FOR USE
Always observe the safety instructions and applicable regulations.
BODY AND HAND POSITION
Proper positioning of your body and hands when operating the mitre saw will
make cutting easier and safer.
• Never place your hands near the cutting area or blade.
• Hold the workpiece tightly to the table and the fence when cutting.
• Keep your hands in position until the trigger switch has been released
and the blade has completely stopped.
• Always make dry runs (without power) before cuts so that you can
check the path of the blade.
• Do not cross your hands.
SWITCHING ON AND OFF
1. To start the saw, squeeze the
trigger switch.
• Allow the motor to reach full
speed before cutting.
2. To stop the saw, release the
trigger switch.
WARNING: THE BLADE WILL CONTINUE TO ROTATE AFTER THE SWITCH HAS
BEEN RELEASED.
Summary of Contents for CMS10S2
Page 28: ......
