12
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
FITTING WORK SUPPORTS
1. Loosen the work support securing
screw.
2. Slide the work supports into place
as shown.
3. Secure them in place by
tightening the work support
securing screw.
DUST EXTRACTION
This machine is provided with a dust
extraction point for connection to a
dust bag (supplied).
1. Place the dust bag over the dust
extraction port using the clip on
the neck of the dust bag.
2. Make sure the zipper on the dust
bag is closed.
3. The dust extraction port may also
be connected to a suitable
extraction system,using the appropriate hose (not supplied)
• The hose must have an inside diameter of 32 mm.
Summary of Contents for CMS10S2
Page 28: ......
