7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
OPERATION
USING THE WORKLIGHT
1. Set the ON/OFF switch to the ON
position.
2. Press and hold the push button for
3 seconds to turn the worklight on.
3. Press the push button again.
• The worklight will flash using the
morse code SOS pattern.
4. Press the push button again.
• The worklight will flash on and
off.
5. Press the push button again to turn the worklight off.
USING THE USB POWER SUPPLY
• This will supply a maximum of 2.1A at 5V.
1. Insert the USB cable into one of
the USB sockets on the side of the
power pack.
2. Plug the other end of the cable
into your device.
3. Set the ON/OFF switch to the ON
position.
4. Press the Push button once to start
charging.
• The display shows the percentage left in the power pack.
Summary of Contents for CLIPPJS
Page 12: ......
