6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CHARGING THE POWER PACK
You can charge your power pack using
either:
• The mains charger (A).
• The cigar lighter adapter (B).
1. Switch the power pack off.
2. Plug the mains charger or cigar
lighter adapter into the charger
input socket.
3. Connect the other end to either
the mains supply or cigar lighter
socket.
• If using the cigar lighter
adapter, start the engine first.
• The display will show the current charge percentage and the word
‘IN’.
4. When the display shows 100% disconnect the charger.
TO ENSURE MAXIMUM LIFE FROM THE BATTERY.
• Charge this unit before using it for the first time.
• Recharge after every use if possible, and thereafter, once every
three months.
• Never leave the unit in a state of discharge.
Summary of Contents for CLIPPJS
Page 12: ......
