11
RECHARGING
Recharge the battery pack following each period of use as described on
pages 8-9.
1. Check that the red CHARGING light illuminates and remains flashing
during the charging process.
2. If the red CHARGING light goes out almost straight away after repeating
this procedure a couple of times, although the green POWER ON light is lit,
the battery pack should be replaced with a new one.
3. The charging light should remain flashing for about 1 hour, after which, the
battery cartridge may be removed and used.
4. After charging, remove the charger from the power supply.
5. For maximum battery life, we recommend that you maintain the battery
in a fully charged state at all times.
MAINTENANCE
•
Ensure all fixings remain tight to ensure the machine is in safe working
condition.
•
All bearings etc, in this machine are lubricated with a sufficient amount of
high grade lubricant for the machines lifetime under normal operating
conditions, therefore no further lubrication is required.
•
Refer to your CLARKE dealer if internal maintenance is required.
•
Check the battery charger power cable to ensure it is free from cracks,
bare wires etc.
•
Avoid using solvents when cleaning plastic parts, most plastics are
susceptible to damage from the various types of commercial solvents.
Keep the unit clean by wiping with a dry cloth. DO NOT use solvents as a
cleaning agent.
Your Clarke Impact Wrench has been designed to give long and trouble free
service. If, however, having followed the instructions in this booklet carefully,
you encounter problems, take the unit to your local Clarke dealer.
STORAGE
•
Make sure that the machine is stored in a clean, dry place, out of reach of
children when not in use.
•
Always store the machine and its charger in the case supplied.
