7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
LOWERING THE BICYCLE
1. Pull the rope towards the rear pulley in the direction shown as “unlock” to
release the locking mechanism as shown in Fig 6, while maintaining tension
on the rope.
• The tension will keep the locking mechanism open and allow the
bicycle to lower.
2. Slowly let the rope out as the bicycle lowers. Once the bicycle is lowered,
remove it from the hooks and tie the rope back to the cleat.
3. When lowering a load, be aware that when the rope is released, the load
will not stop unless the locking device is engaged.
PERIODIC MAINTENANCE
Before use, it is recommended to carry out the following checks. When in
constant use, the system should be inspected more frequently.
1. Check the security and condition of the mounting point.
2. Check the condition of the hooks and the security of all screws.
NOTE:
the nuts and bolts must still have enough freedom to move.
3. Check the condition of the rope and that it is not chaffed or fraying.