background image

3

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

SAFETY PRECAUTIONS

ALWAYS learn the pump’s applications, limitations and specific potential     
hazards peculiar to it. Read and become familiar with the entire operating 
manual.

ALWAYS ensure that the local supply voltage corresponds with the supply 
information on the pump’s data plate.

ALWAYS check the pump for damage before use. Any damaged part should 
be checked to ensure that it will operate properly and perform it’s intended 
function. Check for alignment of moving parts, breakage of parts, mountings, 
and any other condition which may effect the machine’s operation. Any 
damage should be properly repaired or the part replaced. If in any doubt DO 
NOT use the pump. Consult your local CLARKE dealer.

ALWAYS keep children away. All visitors should be kept at a safe distance from 
the work area, especially whilst operating the pump.

ALWAYS maintain the pump in top condition and keep it clean for best 
performance. Follow any maintenance instructions.

ALWAYS handle with care, do not carry the pump by it’s electrical cable, or 
yank the cable to disconnect it from the power supply.

ALWAYS concentrate on the job at hand, no matter how trivial it may seem. Be 
aware that accidents are caused by carelessness due to familiarity.

ALWAYS remove the plug from the electrical supply when adjusting or 
changing parts.

ALWAYS use recommended accessories, the use of improper accessories 
could be hazardous.

ALWAYS guard against electric shock. Safety can be further be improved by 
using a residual current device (RCD).

ALWAYS ensure that the power supply used to power the pump is connected 
to an efficient grounding system.

ALWAYS store the pump out of the reach of children, DO NOT allow children to 
operate the pump.

WARNING: AS WITH ALL MACHINERY, THERE ARE CERTAIN HAZARDS 
INVOLVED WITH THEIR OPERATION AND USE. EXERCISING RESPECT AND 
CAUTION WILL CONSIDERABLY LESSEN THE RISK OF PERSONAL INJURY. 
HOWEVER, IF NORMAL SAFETY PRECAUTIONS ARE OVERLOOKED OR 
IGNORED, PERSONAL INJURY TO THE OPERATOR OR DAMAGE TO 
PROPERTY, MAY RESULT 

Summary of Contents for CBB100













Reviews: