7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BEFORE USE
Ensure the compressor is turned off.
1. Remove the travel plug from the
bottom of the tool as shown.
2. Pour 2-3 drops of CLARKE airline oil
into the air inlet. This should be
done regardless of whether or not
a lubricated air supply is to be
used.
3. Connect a suitable hose to the
tool as shown.
• Use the adapter supplied if
required.
4. Connect the other end of the hose
to the compressor.
You can fit a whip hose with a quick fit
coupling if required (available from
your Clarke dealer.)
FITTING THE CHISEL
1. First remove the retaining spring
from the nose by unscrewing it.
• Use the inboard lug to gain
purchase.
2. Insert the end of the chisel into the
air hammer.
3. Replace the retaining spring, as
shown.
• Use the lugs to tighten.
WARNING: COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU
ARE FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE USE OF
COMPRESSORS AND COMPRESSED AIR SUPPLY.
Summary of Contents for CAT114
Page 16: ......
