Clarke CAG800B, Operating & Maintenance Instructions

Page: 15 / 20

15
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
SELECTING THE CORRECT GUARD
An open and a closed guard is
supplied with the CAG800B.
The “open” guard is for grinding and
the “closed” one is for cutting.
The open guard should be used with
type 27, 28 and 29 discs as follows;
• Type 27 -Depressed centre
grinding wheels
• Type 28 -Depressed centre
grinding wheels cone shaped
• Type 29 -Depressed centre semi-flexible wheels
The closed guard should be used with type 1, 41 & 42 discs as follows;
• Type 1 - Straight grinding wheels
• Type 41 - Flat cutting off wheels
• Type 42 - Depressed centre cutting off wheels
SUITABLE ABRASIVE AND CUTTING DISCS
The following Clarke discs are suitable for use with the CAG800B. Always use
the correct disc type and guard for its intended task.
MAINTENANCE
CHANGING THE CARBON BRUSHES
1. The CAG800B is supplied with a replacement pair of carbon brushes for the
motor. These may be replaced after extensive use by your Clarke dealer or
a suitably qualified technician.
• Both brushes should be replaced at the same time.
Use Model No Diameter Bore Part No
Cutting & Grinding PD1 (plasma) 115mm 22mm 3052050
Metal Cutting ------------------ 115mm 22mm 6470775
Metal Grinding ------------------ 115mm 22mm 6470705
Masonry Cutting ------------------ 115mm 22mm 6470735