4
7.
NEVER
force the tool. It will do a better and safer job at the rate for which it
was designed.
8.
ALWAYS USE A FACE OR DUST MASK
if operation is particularly dusty.
9.
DRUGS, ALCOHOL, MEDICATION
. Do not operate tool while under the influence
of drugs, alcohol or any medication.
10.
USE RECOMMENDED ACCESSORIES.
The use of improper accessories could
be hazardous.
11.
NEVER LEAVE THE TOOL RUNNING UNATTENDED
. Turn power OFF. Do not leave
the tool until it comes to a complete stop.
12.
AVOID DANGEROUS ENVIRONMENT.
Don’t use power tools in damp or wet
locations or expose them to rain. Keep your work area well illuminated.
DO NOT USE in explosive atmosphere (around paint, flammable liquids etc.).
13.
KEEP CHILDREN AWAY
. All visitors should be kept a safe distance from the work
area, especially whilst operating the tool.
14.
MAINTAIN TOOL IN TOP CONDITION.
Keep tools clean for the best and safest
performance. Follow maintenance instructions.
15.
DON’T OVERREACH
. Keep your proper footing/balance at all times. For best
footing wear rubber soled footwear. Keep floor clear of oil, scrap wood, etc.
16.
WEAR PROPER APPAREL
. Loose clothing or jewellery may get caught in moving
parts. Wear protective hair covering to contain long hair.
17.
HANDLE WITH EXTREME CARE
Do Not carry the tool by its’ electric cable, or
yank the cable to disconnect it from the power supply .
18.
AVOID ACCIDENTAL STARTING.
Ensure the switch is OFF before plugging in to
mains.
19.
BE AWARE
that accidents are caused by carelessness due to familiarity.
ALWAYS concentrate on the job in hand, no matter how trivial it may seem.
20.
ALWAYS
store the tool in a clean dry environment when not in use, out of
reach of children
21.
ALWAYS
guard against electric shock, avoid contact with earthed surfaces -
pipes, radiators etc.
22.
ALWAYS
secure work - use a vise or clampswhenever possible.
ADDITIONAL PRECAUTIONS FOR ANGLE GRINDERS
1.
It is strongly advised that you wear ear protectors/defenders
as the noise
level during operation, depending upon the work being carried out, can
exceed safe working levels.
2.
Always wear a good pair of industrial gloves
to avoid potential injury from
sparks and debris.
3.
Do not use the tool
if the electric cable, plug or motor is in poor condition.
