6
ASSEMBLY
1.
Remove the plastic travel plug from the oil filling hole (fig.1) and insert the
dipstick (fig.2)
2.
Remove the plastic dust cap from the hole in the side of the head, (fig 3), and
squirt a few drops of commonly available light oil (3 in 1 or similar), into the
cylinder head.
3.
Screw on the air intake filter (fig.4)
Fig.2
Fig. 1
Fig.4
Fig.3
PREPARATION FOR USE
Check the oil level is at the correct level on the
dipstick, as shown in Fig.5. Where necessary, top up
with Clarke SAE40 Compressor Oil available from your
Clarke dealer.
Fig.5
PARTS LISTS
AND
DIAGRAMS
11
