2
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INTRODUCTION
Thank you for purchasing this CLARKE Welder Generator designed to provide
single phase electrical power for power or arc welding. No other appliance
other than those indicated should be used with this machine.
Please read through this document and the instruction manuals for the engine
and alternator thoroughly before operating the machine. In doing so you will
ensure the safety of yourself and that of others around you. This will also ensure
that the welder generator will give you long and satisfactory service.
It is important that all accompanying instructions are observed. Clarke
International does not accept responsibility for any injury or damage caused
through improper use.
Please keep these instructions in a safe place for future reference.
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of
12 months from the date of purchase. Please keep your receipt as proof of
purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission. This guarantee does not effect your
statutory rights.
ENVIRONMENTAL RECYCLING POLICY
By purchasing this product, the customer is taking on the
obligation to deal with its safe disposal in accordance with the
Waste Electrical and Electronic Equipment (WEEE).
In effect, this means that this product must not be disposed of with
general household waste. It must be disposed of according to the
laws governing at a recognised disposal facility.
Please note that the details and specifications contained herein, are correct
at the time of going to print. However, CLARKE International reserve the right
to change specifications at any time without prior notice. ALWAYS CONSULT
THE MACHINE’S DATA PLATE.
Summary of Contents for 8130535
Page 24: ......
