background image

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE Sand Blast Cabinet which is designed for 
professional workshop use.

Before attempting to operate the cabinet, please read this manual 
thoroughly and carefully follow all instructions given. In doing so you will ensure 
the safety of yourself and that of others around you, and you can also look 
forward to the product giving you long and satisfactory service. 

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of 
12 months from the date of purchase. Please keep your receipt as proof of 
purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission.

This guarantee does not effect your statutory rights.

ENVIRONMENTAL PROTECTION

Recycle unwanted materials instead of disposing of them as 
waste. All unwanted accessories and packaging should be sorted 
and taken to a recycling centre for disposal in a manner which is 
compatible with the environment.

Through purchase of this product, the customer is taking on the obligation to 
deal with the WEEE in accordance with the WEEE regulations in relation to the 
treatment, recycling & recovery and environmentally sound disposal of the 
WEEE.

In effect, this means that this product must not be disposed of with general 
household waste. It must be disposed of according to the laws governing 
Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal 
facility.

Summary of Contents for 7640115













Reviews: