Clarke 7627901, Operation Instructions Manual

Page: 6 / 12

6
ASSEMBLY
1. Insert the bracket spacer rod into the
bottom of the lower wheel bracket,
as shown.
2. Turn the frame upside down and
insert the lower wheel bracket into
the frame, as shown.
• Inserting the wheel bracket into
the frame when it is upside down
will keep the spacer rod inside the
bracket.
3. Lay the frame down flat and thread
the lower wheel adjustment screw
into the frame opposite the wheel
bracket.
4. Secure the assembly in a bench
mounted vice (not supplied), as
described on page 5. Screw the
locking knob in the threaded hole, as
shown.
NOTE: Make sure the adjustment
screw handle has enough
clearance from the bench to
fully rotate.