Clarke 7617000, Operation & Maintenance Instructions Manual

Page: 7 / 16

7
ASSEMBLY
When assembling the Hydraulic Ram, Pump unit and attachments, unscrew
and retain the plastic end plugs on the connections of the Ram and Hydraulic
Spreader Wedge for future use. Ensure the hydraulic hose is tightly screwed to
the connection.
1. Screw the Pump Handle into the socket in the pump unit.
2. If the Hydraulic
Spreader Wedge is
to be used, connect
the screw-in
connector of the
pump hose to the
spreader wedge as
shown in Fig 1.
3. If the Ram is to be
used, fit the Flat Base to the static end of the Ram using the male
connector. Connect other attachments to the moving end as required.
• Various combinations of extension tubes and attachments can be
assembled as shown in Fig 2, according to the distance between
the work surface and the supporting frame.