Clarke 7614051, Operating & Maintenance Instructions

Page: 6 / 12

6
OPERATION
Before Use
1. Visually inspect the shop press for damaged, loose or missing parts.
If any parts are damaged or missing, DO NOT use the shop press, contact your
Clarke dealer for repair or servicing.
2. Replace any worn or defaced warning labels, these are available from your
Clarke dealer
Setting the bed height
1. Remove any arbor plates (8)
from the work bed (9).
2. Hold the work bed securely with
two hands and lift it off of the
support pins. Place the work
bed carefully on the floor.
3. Inserting the support pins (10)
into the appropriate holes in the
main frame at the required
height.
Make sure that the support pins (10) are level and secured using the clevis pins
supplied (25).
4. Carefully place the work bed onto the support pins and replace the arbour
plates.
Clevis
Pin Support
Pin
Fig. 6