background image

4

FOR YOUR OWN SAFETY

KEEP CHILDREN AWAY

Do not allow children to touch the pump, cables or connections.

USE A RESIDUAL CURRENT DEVICE:

The pump must be connected to a high sensitivity residual current device
(RCD) which has a tripping current of less than 30mA.

STORAGE

When not in use, the pump should be stored in a dry, secure place out of the
reach of children.

WATER TEMPERATURE

 • Do not use the pump if the water is liable to freeze, as this can cause damage

to the pump.

MAINS SUPPLY

Disconnect the pump from the mains supply when not in use.

REPAIRS

Have the pump repaired by a qualified person.

DO NOT ABUSE THE MAINS LEAD

Never carry the pump by the mains lead.

Never pull the mains lead to disconnect the pump from the mains socket.

Keep the mains lead away from heat, oil and sharp edges.

Always check the plug, mains cable and float switch cable for damage before
use. Do not use the pump if damaged. Refer to qualified service personnel for
repair.

If you have to use an extension lead with this product, it must be designed for
outdoor use and incorporate a cable suitable for use with Class I appliances.

Do not lower the pump using the mains lead, Always use the handle with a
rope or cord attached if necessary,.

DO NOT ABUSE THE  FLOAT SWITCH

 • Do not lift the pump by the mains or float switch cables.

Summary of Contents for 7260065













Reviews: