5
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INSTALLATION
Because of the variety of possible installations, no plumbing accessories are
supplied with your pump, however accessories are available from your
nearest CLARKE dealer. Contact your CLARKE dealer for further information.
NOTE:
It is recommended that the end user should consult a qualified installer
if there are any doubts as to the suitability of this product for a
particular installation.
IMPORTANT: The pump MUST NOT be connected to the mains power supply
until all hose/pipe installation is completed.
INSTALLATION OF THE PUMP
A typical installation of the pump is shown above. The pump must always be
installed and operated in a horizontal position i.e. with the outlet port facing
vertically upwards. The fixing holes in the base should be used to secure the
pump firmly in its operating position. Mount the pump on raised blocks or a
purpose built platform to protect it from flooding.
Always ensure there is adequate air circulation around the motor and that the
transparent filter cover is accessible so that the filter basket can be removed
for cleaning. The pump should be installed in a dry, well ventilated enclosure,
sheltered from rain, such as a purpose built pump room.
The pump is usually installed between the pool skimmer and the pool filter and
should be positioned as near to the pool water level as possible.
Summary of Contents for 7175036
Page 16: ......
