Clarke 6505512, Operation & Maintenance Instructions Manual

Page: 18 / 24

18
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
SUITABLE ACCESSORIES
Drill Press Vices available from your Clarke dealer include:
Table Clamps available from your Clarke dealer include:
Drill bit burns or
smokes. a. Incorrect speed.
b. Swarf is not discharging
c. Dull drill or not proper
clearance for material.
d. Needs coolant.
e. Excessive feed pressure
a. Refer to Cutting Speed chart
& adjust drill speed
accordingly.
b. Clean drill.
c. Check sharpness & taper.
d. Use coolant whilst drilling.
e. Apply less pressure.
Table difficult to
raise. a. Needs lubrication.
b. Table lock tightened. a. Lubricate with light oil.
b. Loosen clamp.
Model Jaw Width Max Opening Depth Weight Part No
CDV30C 76 mm 78 mm 19 mm 2 kg 6504019
CDV40C 102 mm 97 mm 28 mm 3 kg 6504020
CDV50C 127 mm 125 mm 37 mm 5 kg 6504021
CDV60C 152 mm 150 mm 38 mm 6 kg 6504022
Model Size Max Clamp Height Part No
CVC6 152 mm 38 mm 6501920
CVC9 229 mm 95 mm 6501925