Clarke 6500112, Operating & Maintenance Instructions

Page: 12 / 16

12
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
1. If the grinding stone is new, allow it to spin for a minute with no load. Check
that it is spinning straight and true. If not, it will require dressing before use.
2. Stand to the side of the stone and hold the dresser handle firmly. Place the
dresser on the tool support so that its wheels can move freely (i.e, the
exposed part of the wheel should be facing up). Run the stone and apply
the dresser to the surface of the stone.
CLEANING & STORAGE
Clean the exterior the machine if required using a mild detergent or mild
solvent. Never immerse the machine in water. To reduce any fire hazard, keep
any cooling vents in the grinder free of debris.
If not bolted to a workbench, store the grinder in a clean, dry location, out of
reach of children.
ACCESSORIES
SPECIFICATIONS
Description Part No
150mm Dry Grinding Wheel - Fine 6501043
150mm Dry Grinding Wheel -Medium 6501044
150mm Dry Grinding Wheel -Coarse 6501045
Feature Value
Weight 11 kg
Grinding Stone Dimensions (Dry Wheel) 150 dia x 21 mm (12.7 mm bore)
Grinding Stone Dimensions (Wet Wheel) 200 dia x 40mm (20mm bore)
Rated Voltage / Frequency 230 V / 50 Hz
Motor Wattage 275 W
No Load Speed 135/2900 rpm
Duty Cycle Classification 10 minutes on/10 minutes off