8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
INSTALLING/CHANGING BLADES
1. Use only jigsaw blades with the
correcting T-shank.
2. This jigsaw comes with a
convenient tool-less quick release
blade retainer. To install a blade,
use your thumb to pull the lever
counterclockwise to open the
blade retainer (A).
3. With the blade teeth facing
forward, insert the blade (B) into
the blade retainer as far as it will
go. Make sure that the back edge
of the blade sits against the blade
support roller (C). Move the spring-loaded lever (A) to insert the blade,
then pull on the blade until the blade retainer snaps shut and secures the
blade.
• Take care never to use cracked, blunt or damaged blades.
OPERATION
TURNING ON AND OFF
1. To start the jigsaw, squeeze the
trigger (B). Wait until the blade is
running at speed before
attempting to cut the workpiece.
CONTINUOUS OPERATION
1. Maintain the saw at constant
speed by pressing in the lock-on
button (A).
• You can then release your
finger pressure on the trigger
(B).
CAUTION: DO NOT PLUG INTO THE MAINS UNLESS YOU HAVE ENSURED
THE JIGSAW IS SWITCHED OFF. TO DO THIS, SQUEEZE THE TRIGGER FULLY
UPWARDS, THEN RELEASE IT. THE TRIGGER IS LOCATED UNDER THE GRIP.
Summary of Contents for 6462183
Page 16: ......
