background image

2

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

INTRODUCTION

Thank you for purchasing this CLARKE jigsaw which is designed for DIY use.

When unpacking, check for damage or shortages etc. Any found should be 
reported to your CLARKE dealer where the saw was originally purchased. 

Before attempting to use this product, please read this manual thoroughly and 
follow the instructions carefully. In doing so you will ensure the safety of yourself 
and that of others around you, and you can look forward to your purchase 
giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 
months from the date of purchase. Please keep your receipt which will be 
required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission.

This guarantee does not effect your statutory rights.

ENVIRONMENTAL RECYCLING POLICY

By purchasing this product, the customer is taking on the obligation to 
deal with its safe disposal in accordance with the Waste Electrical and 
Electronic Equipment (WEEE).

In effect, this means that this product must not be disposed of with general 
household waste. It must be disposed of according to the laws governing 
Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal 
facility.

If disposing of this product or any damaged components, do not dispose of 
with general waste. This product contains valuable raw materials. Metal 
products should be taken to your local civic amenity site for recycling of metal 
products.

Summary of Contents for 6462183

















Reviews: