9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ATTACHING THE TABLE ADJUSTMENT HANDLE
Slide the table adjustment handle
(16) onto the shaft (see Fig. 4).
To raise or lower the table.
Adjust the thicknesser table by
turning the table adjustment handle:
Lower the table - Turn anticlockwise.
Raise the table - Turn clockwise.
ATTACH THE DUST/CHIP EXTRACTION CHUTE
IMPORTANT: Please note that the Dust Chute MUST ALWAYS be in place; the
machine will not operate if is removed.
A. FOR PLANING
Lower the Thicknesser Table as far as
possible by turning the table
adjustment handle (see Fig.4) fully
anticlockwise.
Pull out the two locking keys
(arrowed in Fig.5) and manoeuvre
the chute into the space beneath
the table.
Ensure both locking keys are pushed
firmly into the slots in the table, shown
in Fig 6.i
Summary of Contents for 6462130
Page 20: ......
