6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
ELECTRICAL CONNECTIONS
This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug,
for connection to a standard, domestic electrical supply. If the plug needs
changing, make sure that a plug of identical specification is used.
If the colours of the wires in the power cable do not correspond with the
markings on the terminals of your plug, proceed as follows.
• Connect the
blue
wire
to the terminal which
is marked
N
.
• Connect the
brown
wire to the terminal
which is marked
L
.
• Connect the yellow
and green wire to the
terminal which is
marked E or
.
We recommend that this machine is connected to the mains supply via a
Residual Current Device (RCD).
If in doubt, consult a qualified electrician. DO NOT attempt any repairs yourself.
EXTENSION CABLES
Always use an approved extension cable suitable for the power rating of this
tool (see specifications), the conductor size must be at least the same size as
that on the machine, or larger.
WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS FULLY
BEFORE CONNECTING THE TOOL TO THE MAINS SUPPLY.
WARNING: THE WIRES IN THE CABLE ARE COLOURED AS FOLLOWS:
BLUE = NEUTRAL BROWN = LIVE YELLOW AND GREEN = EARTH
Plug must be BS1363/A approved.
Always fit
make sure that the outer sheath of
Neutral
(Blue)
Live
(Brown)
a 13 Amp
the cable is firmly held by the clamp
fuse.
Summary of Contents for 6462130
Page 20: ......
