MAINTENANCE
•
Always inspect the tool before use and ensure it is in top condition.
•
Keep the ventilation slots clear at all times, prevent foreign matter from entering.
•
Check the power cable to ensure it is in sound condition and free from cracks,
bare wires etc.
•
Avoid using solvents to clean the plastic parts of the jointer, most plastics are
susceptible to damage from the various types of commercial solvents. Use a
moist soft cloth only.
•
Lubricate all moving parts at regular intervals.
•
After extensive use the grease in the gearbox will require replenishment, consult
your CLARKE dealer regarding this.
TROUBLE SHOOTING
PROBLEM
: Biscuit Jointer is Overheating.
CAUSE:
TROUBLE SHOOTING:
The tool is dirty.
Tool is being overloaded.
Clean the ventilation holes, blow out
with compressed air or clean with a
dry cloth.
Do not use for heavy duty work, do
not apply excessive pressure.
PROBLEM
: Excessive Sparking Occurs.
CAUSE:
TROUBLE SHOOTING:
Worn motor brushes.
Consult your CLARKE dealer for parts
and advise.
PROBLEM
: Biscuit Jointer does not operate when switched ON.
CAUSE:
TROUBLE SHOOTING:
Blown fuse.
Check the fuse is sound and replace
if required. If the fuse continues to
blow or the fuse is sound and the
jointer fails to operate consult your
CLARKE dealer.
- 14 -
