OPERATION CONTINUED
NOTE: Always unplug the biscuit jointer before making any adjustments.
1.
Using a combination square draw a
reference mark ‘
A
’ through the
centre point of each joint
perpendicular to the mitred edge ‘
B
’.
2.
Follow the cutting instructions (2-14) for
edge to edge jointing on page 8.
MAKING MITRE JOINTS
MAKING BUTT JOINTS
1.
Position the mating pieces together
and draw a reference mark ‘
A
’ at 90°
to the centre point of each proposed
joint location ‘
B
’,.
2.
Follow the cutting instructions (2-14) for
edge to edge jointing on page 8.
A
B
A
B
MAKING CORNER JOINTS
1.
Position the pieces together and draw a reference line on the outside face of
one piece and the end of the second piece.
2.
Follow the cutting instructions (2-11)
on page 8 and cut a slot into
the end of piece ‘
A
’.
3.
Clamp piece ‘
B
’ that it protrudes
above your work bench.
4.
Without changing any of the settings
on the jointer. Follow the cutting
instructions (5-14) on page 8 and cut
a slot into the face of piece ‘
B
’.
A
B
- 9 -
