Clarke 6460123, Operation And Maintenance Instruction

Page: 31 / 44

31
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
NOTE: Since the bearings twist the blade into position, it is acceptable if
there is 0.025mm - 0.050mm of a gap between the blade and the
front or back of the bearing. Just make sure not to squeeze the
blade too tightly with the bearings. After the guide bearings are
set, you should be able to rotate the guide bearings (although
they will be stiff) with your fingers.
The backing bearing is not adjustable and should make light contact with the
blade.
STORAGE
When storing the bandsaw, disconnect the power cable, cover the machine
with a plastic sheet and store it in a dry location.
REPLACEMENT BLADES & SUNDRIES
Replacement blades and sundries are available from your CLARKE dealer;
Blade (10tpi) 1 per pack Part no 1600772
Blade (24tpi) 1 per pack Part no 1600771
CLARKE cutting fluid ref: 1 Litre Part no 3051059
CLARKE cutting fluid ref: 5 Litre Part no 3051061