9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
The battery pack should slide in easily. If it is not to be fitted immediately,
ensure that the metal contacts are protected to avoid the possibility of a short
circuit which would cause battery damage. For maximum battery life, we
recommend that you maintain the battery in a fully charged state.
OPERATION
FITTING A SOCKET
1. Align the chosen socket and
simply push it onto the anvil. Use
only ½” square drive impact
sockets as listed on page 12.
2. Squeeze the trigger to start the
impact wrench. Release the
trigger to stop.
FORWARD/REVERSE SELECTION
1. Select the direction of operation
by pushing the selector bar in the
appropriate direction.
• The direction of rotation is
shown on the end face of the
selector bar.
• When the selector bar is in the
central position the trigger is
locked.
2. Always check the direction of
rotation before operation.
CAUTION: MAKE SURE THAT THE IMPACT WRENCH IS OFF USING THE
SELECTOR BAR BEFORE ATTACHING OR REMOVING A SOCKET. ALWAYS
TAKE CARE TO USE THE CORRECT SIZE SOCKET FOR BOLTS AND NUTS. AN
INCORRECT SOCKET WILL CAUSE DAMAGE TO THE BOLT OR NUT.
Summary of Contents for 4500615
Page 16: ......
