background image

5

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

4. Dispose of spent batteries correctly as they contain Lithium-ion. They are re-

cyclable and should be taken to a recycling centre to be disposed of as 
stipulated by local regulations. Do not incinerated battery as it may 
explode when exposed to fire. Do not attempt to open, disassemble, 
modify or service a battery pack.

5. Handle batteries so as to avoid damage, fire, corrosion or personal injury.

6. Never crush, puncture, short external contacts or dispose of in fire or water.

7. Never attempt recharging the battery by means of an engine generator or 

a DC power source.

8. Never attempt to disassemble the battery.

9. Never allow a leaking battery to contact your person. If you come into 

contact with battery liquid take the following immediate action:

• Skin contact: Wash immediately with soap and water, then wash 

flesh in either lemon juice or vinegar.

• Eye contact: Wash with a strong solution of boric acid and seek 

immediate medical attention

SAFETY SYMBOLS

The full technical specification of the battery charger is printed on a label on 
the charger. The meanings of the markings and symbols are shown below

Please keep these instructions in a safe place for future reference.

Read instruction 
manual before use

Suitable for indoor use 
only

Wear eye protection 
when using this 
product.

Maximum Temperature 
(battery pack only)

Class 2 Double 
Insulated

Do not Incinerate 
(battery pack only)

Weee directive 
compliance required 
for Lithium-Ion 
batteries.

Do not immerse in 
water (battery pack 
only)

Summary of Contents for 4500615

















Reviews: