7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
2. Connect the Brace (9) & Swaged Brace (8) together. Attach a Brace (9)
and Front Purlin (6) to the first Straight Tube (4) at the Base Plate (5a/b),
using long bolt (11) and nut (12).
3. Insert the tapered end of a Swaged
Purlin (7) into the end of the Front Purlin
(6) and secure using a long bolt (11) and
nut (12). Continue assembling purlins in
this way to the end of the structure, then
attach a Brace (9) between the last
Purlin (7) and Straight Tube (4), using a
long bolt (11) and nut (12).
4. Repeat steps 1 and 2 at the end of this
row.
NOTE: In the entire assembly, all bolts must
be mounted from the outside-in, so
that the roof cover (15c) will not be
damaged by the bolt ends.
5. Assemble and secure three arches at a
time. Refer to the illustration following.
• Lay out three Roof Curved Pipes (1), six Short Curved Pipes (2), and
six Long Curved Pipes (3).
• Insert the Short Curved tubes (2) into each end of the Roof Curved
tubes (1). Align the screw holes and secure with Short Bolt (10) and
Nut (12).
• Insert the Long Curved Tubes (3) into the Short Curved Tubes (2).
Align screw holes.
Summary of Contents for 3503594
Page 12: ......
