11
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
and re-set the ratchet to allow for more strap material becoming wound
around the ratchet spindle.
NOTE:
If you are in any doubt as to the security of anchoring of your
garage you should add more anchors.
DISASSEMBLY
When disassembling the garage
depress the spring-loaded bar to
disengage the ratchet and open
the ratchet handle completely to
allow the webbing strap to pull
through.
PLEASE RE-READ ALL WARNINGS ON
PAGE 2 OF THESE INSTRUCTIONS.
SAVE THESE INSTRUCTIONS FOR
FUTURE USE.
To dismantle, execute all instructions
in reverse order.
Store your garage in a cool, dry location between seasons to prolong the
usable life of all components. Components are not equally durable and will
require replacement over time at differing intervals.
MAINTENANCE
1. The cover can be cleaned with soap and water.
2. For best performance, keep all parts of this product clean and dry.
3. Check periodically (two to three times in the first week) and tighten the
turnbuckles and all hardware as needed. You may need to remove and re-
set the turnbuckles to allow for more strap material becoming wound
around the spindle.
4. To dismantle, execute all instructions in reverse order.
5. Store your garage in a cool, dry location between seasons to prolong the
usable life of all components. Components are not equally durable and
will require replacement over time at differing intervals.
WARNING: IF POSITIONING THE GARAGE IN A WINDY LOCATION
ALWAYS ENSURE THE FRONT DOOR IS KEPT FULLY CLOSED TO PREVENT
WIND LIFTING IT FROM INSIDE.
WARNING: SERIOUS INJURY TO PERSONS OR PROPERTY COULD RESULT IF
THE GARAGE IS NOT SECURELY ANCHORED.
Summary of Contents for 3503594
Page 12: ......
