10
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
STEP 4: ANCHORING THE FRAME
CAUTION: THE STRUCTURE MUST BE WELL ANCHORED. DO NOT ATTEMPT TO
INSTALL ANY OF THE FABRIC BEFORE THE FRAME IS PROPERLY ANCHORED. IF THE
GROUND IS HARD OR ROCKY, PRE-DRILL HOLES BEFORE INSERTING THE ANCHORS.
Four anchors (14) are provided to
secure the structure to the ground.
They are to be installed around the
bent corner legs (3) at each corner.
1. Screw the anchor head into the
ground.
2. Insert the cable (23) through the
eyelets of the anchor (14) and
the bent corner leg (3). Secure
the cable (23) with the cable
clamp (24). Repeat the same
procedure for the other three
anchors.
Ensure the clamps are gripping the
calbel securely.
STEP 5: INSTALLING THE FRONT AND BACK PANELS
The front cover has a zippered door to allow entry to the shed. Be sure to
locate this cover at the desired end and ensure the zipper is in the closed
position while installing.
Both the covers are installed in the same fashion.
Summary of Contents for 3503584
Page 16: ......
