14
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Make sure the
cross rails are horizontal and level.
Repeat the same procedure for the opposite side of the roof cover (19).
Check and make sure all the bottom cross rails (6) are level and horizontal,
and are all the same height from the ground.
Tighten all the nuts and bolts at this stage.
Fasten the black straps at the four corners with the ratchet tie-down (22).
NOTE:
Over-tightening can cause damage to straps and/or the anchor
point. Do not over-tighten!
Check and tighten the bottom cross rails (6) and ratchets (22) monthly to
ensure the roof cover is tight and secure. The shelter is now ready for use..
WARNING: IF POSITIONING THE SHED IN A WINDY LOCATION ALWAYS
ENSURE THE FRONT DOOR IS KEPT FULLY CLOSED TO PREVENT WIND
LIFTING THE SHED FROM INSIDE.
Summary of Contents for 3503584
Page 16: ......