7
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
AIRLINE SAFETY
•
Never exceed the maximum operating pressure for the sander. A pressure
of 90 psi with a flow of 6 cfm is required. Too high an air pressure will
shorten the life of the tool due to excessive wear.
•
The air hose must be rated at least 150% of the maximum operating
pressure of the tool.
OVERVIEW
The CAT34B Orbital Sander is ideal for use in the automotive industry or any
task of smoothing wood, fibreglass or body filler. The sander features a
balanced ball-bearing design, rear exhaust & automatic throttle release. The
CAT34B sander holds standard 93 x 232mm sanding sheets which are
available from your CLARKE dealer.
ASSEMBLY
1. Remove the plastic blanking plug
from the connection port of the
sander .
2. Pour 2-3 drops of CLARKE airline
oil into the air inlet. This should be
done regardless of whether or not
a lubricated air supply is to be
used.
3. Connect a suitable hose to the
sander as shown. Use the screw-in
adaptor supplied if required.
4. Connect the other end of the hose to the compressor.
(A whip hose with a quick fit coupling is available from your CLARKE
dealer).
5. Turn on the air supply and check for air leaks. Rectify any found before
proceding.
Your sander is now ready for use.
Fig 1
