5
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
•
ALWAYS ensure that any attachments are correctly fastened before
connecting the sander to the power supply.
•
Always disconnect from the air supply when:
a)
performing any maintenance.
b)
the sander is not in use.
c)
the sander will be left unattended.
d)
moving to another work area.
•
Avoid damaging the sander for example, by applying excessive force.
•
ALWAYS maintain the sander with care. Keep it clean for best and safest
performance.
•
Quick change air-line couplings should not be located at the tool. They
add weight and could fail due to vibration.
•
DO NOT force or misuse the sander. It will do a better and safer job at the
rate for which it was designed.
•
This sander vibrates during use. Vibration may be harmful to your hands or
arms. Stop using the tool if discomfort, a tingling feeling or pain occurs and
seek medical advice before resuming use. Refer to Vibration Emissions on
page 13.
TRANSPORTATION
•
Never carry the sander by the air supply hose.
•
Never carry the sander with your finger on the trigger.
STORAGE
•
When not in use the sander must be disconnected from the air supply and
stored in a dry place out of the reach of children (preferably in a locked
cabinet).
•
Avoid storing the sander in environments where the temperature falls
below 0
o
C.
