9
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BEFORE USE
Before connecting your compressor to the power supply, check the following:-
• Set the ON/OFF switch to the
OFF position (pushed down).
• Ensure the compressor is
standing on level ground.
• Make sure that the power
supply is suitable.
POSITIONING THE COMPRESSOR
This compressor should be positioned
on a stable, flat surface
.
NOTE:
Note: the compressor should not be operated on a steep slope or
floor angle of greater than 15
O
.
If the compressor is placed on a shelf or raised off the ground, it should be
secured appropriately to prevent it from falling off during use.
Do not cover the compressor. Always position it with good ventilation.
MOVING THE COMPRESSOR
When moving the compressor;
• Always use the handle wherever possible.
• Do not lift by (or place a strain on) the airline fittings or hoses.
• Take care to avoid damaging the valves or fittings.
• Ensure it is switched off and disconnected from the power supply.
Summary of Contents for 2242035
Page 20: ......
