6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
BEFORE USE
Before connecting your compressor to the power supply, check the following:-
• Push down the OFF button
• If fitted, remove the protective
plastic moulding from the top
of the cylinder head.
• Make sure that the supply
voltage matches the voltage
shown on the data label.
• Make sure that the compressor
is on firm level ground.
• This compressor must be
secured to the ground through the feet using suitable bolts and washers.
CHECK THE OIL LEVEL
1. Remove the dipstick from the oil
reservoir.
2. Ensure the oil level is between the
min and max marks on the
dipstick.
• Only use SAE30 compressor oil,
available from your Clarke
dealer Part No. 3050801
• Take care not to exceed the
maximum mark.
WARNING: TO PREVENT INJURY, ALWAYS GET ASSISTANCE WHEN LIFTING
OR MOVING THIS COMPRESSOR. ITS DESIGN MEANS IT IS TOP HEAVY.
Summary of Contents for 2226010
Page 20: ......
