8
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
TURNING THE COMPRESSOR ON
1. Plug the compressor into the power supply.
2. Push down the ON button.
• The compressor will operate
until the reservoir is fully
pressurised. It will then shut
down.
• The compressor will start up
again when the pressure in the
reservoir decreases.
CHECK THE SAFETY VALVE
To make sure that the safety valve works correctly:-
1. Pull on the ring attached.
• Air will be released when you
pull on the ring and stop when
released.
2. If the valve does not operate in
this way, do not use the
compressor. The compressor must
be repaired by a qualified service
agent.
WARNING: DO NOT REMOVE OR TRY TO ADJUST THE SAFETY VALVE.
Summary of Contents for 2226010
Page 20: ......
