background image

5

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

AIR COMPRESSOR SAFETY INSTRUCTIONS

1.

ONLY USE WITHIN THE RECOMMENDED OPERATING TEMPERATURE RANGE: 

This compressor should only be used in an ambient temperature of 

b5

o

C and +40

o

C. (

NEVER

 use below freezing temperatures).

2.

NEVER USE AN AIR COMPRESSOR WHICH APPEARS DEFECTIVE OR IS 
OPERATING ABNORMALLY: 

If the compressor operates unusually or makes 

strange noises, switch off immediately. Arrange repairs with your nearest 
CLARKE dealer.

3.

BREATHING QUALITY AIR: 

This compressor should not be used to supply 

breathing quality air.

4.

AVOID UNINTENTIONAL STARTING: DO NOT

 move the compressor when it is 

connected to the mains power supply.

5.

BEFORE EACH USE CHECK THE COMPRESSOR AND HOSE FOR DAMAGE: 
NEVER 

use the compressor if it has been damaged in any way. Have the 

compressor repaired by a qualified service engineer. DO NOT use the 
compressor if the On/Off switch does not operate correctly.

6.

KEEP THE MOTOR AIR VENTS CLEAR: 

Keep the motor air vents clear and free 

from dust. Wipe regularly to maintain an adequate supply of air and avoid 
using in dusty conditions.

7.

OPERATE THE COMPRESSOR AT THE CORRECT VOLTAGE:

 Make sure that the 

mains supply voltage is the same as the voltage shown on the label.

8. When using the compressor for spray painting:

DO NOT

 work in enclosed areas or near naked flames.

Ensure that the area in which you are working has good ventilation.

Protect your nose and mouth with a suitable face mask.

ALWAYS 

check the safety data sheets for substances being sprayed & 

ensure manufacturer’s instructions are followed.

9.

TAKE CARE WHEN USING THIS COMPRESSOR TO INFLATE SMALL, LOW-
PRESSURE OBJECTS:

 Items such as children's toys or footballs can explode if 

over-inflated.

10.

NEVER STOP THE COMPRESSOR BY REMOVING THE PLUG OR SWITCHING OFF 
AT THE MAINS SUPPLY: ALWAYS

 use the On/Off switch on the compressor 

first.

Summary of Contents for 1498500





















Reviews: