background image

3

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

GENERAL SAFETY WARNINGS

WORK AREA

1.

Keep the work area clean and well lit.

 Floors should always be kept clear. 

Cluttered or dark areas invite accidents.

2.

Keep children and bystanders away while operating a power tool.

 

Distractions can cause loss of control.

3. The compressor should only be used in areas with adequate ventilation 

and should not be exposed to heat or used near flammable substances

PERSONAL SAFETY

1.

ALWAYS 

stay alert, watch what you are doing and use common sense 

when operating the compressor. 

DO NOT 

use the compressor while you are 

tired or under the influence of medication, drugs or alcohol. A moment of 
inattention can result in personal injury.

2.

ALWAYS 

use eye protection when operating compressed air equipment, 

and ensure that others in the work area are protected from flying particles 
from the front and from the side.

3.

ALWAYS

 protect yourself against electric shock.

 

Never operate the 

compressor in wet or damp locations.

4.

NEVER 

over-reach. Keep your proper footing and balance at all times to 

enable better control of the compressor in unexpected situations.

5.

NEVER 

attempt any complex repairs yourself. If you have a technical 

problem contact your local CLARKE dealer.

6.

ALWAYS

 store the compressor out of reach of children.

7.

ALWAYS

 protect your hearing. Ear protection should be worn when 

operating this compressor.

8.

NEVER 

direct the air stream at people or animals as injury may result. 

Compressed air can cause soft tissue damage and propel dirt and other 
particles at high speed.

9.

NEVER 

insert your fingers or other objects inside the motor housing. 

NEVER

 

operate the compressor without the cover in place.

WARNING: WHEN USING ELECTRICAL TOOLS, BASIC SAFETY 
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF 
FIRE, ELECTRIC SHOCK AND PERSONAL INJURY 

WARNING: READ ALL THESE INSTRUCTIONS BEFORE ATTEMPTING TO USE 
THIS PRODUCT AND KEEP THESE INSTRUCTIONS IN A SAFE PLACE.

Summary of Contents for 1498500





















Reviews: