Clarke 07097A, Operator'S Manual

Page: 8 / 21

Clarke ®
American Sanders B-2 (CE) Operator's Manual FORM NO. 70162B - 7 -
MACHINE SET-UP
To prepare the machine for use, follow this procedure:
1. Familiarize yourself with the machine. Read all
danger, warning and caution statements and the
Owner's Manual. If operator is unable to read English,
have the manual explained before operating.
2. To install or replace abrasive, turn the machine upside
down and let it rest on the motor cover. With the
wrench supplied, remove the screw and abrasive
retainer. Hold pad to prevent it from rotating and turn
wrench. See figure 3.
3. Center abrasive on pad and install the abrasive retainer
and screw. Tighten screw.
4. Return machine to upright position.
WARNING: Serious injury could occur when attempting
to replace abrasive while machine is
connected to power supply. Always
disconnect power before installing abra-
sive.
CAUTION: Gearbox damage could result from machine
resting upside down for extended periods
of time. Lubricant may drain from gearbox.
Always return machine to upright position
after installing abrasive.
Figure 3