Clarke 07097A, Operator'S Manual

Page: 6 / 21

Clarke ®
American Sanders B-2 (CE) Operator's Manual FORM NO. 70162B - 5 -
INTRODUCTION AND MACHINE SPECIFICATIONS
The B-2 is specifically designed for finishing floor edges, stairs, and other hard-to-reach surfaces. The handle
location and low center of gravity make the B-2 easy to operate.
The excellent cutting power comes from a powerful universal type motor. A motor that delivers maximum
performance without slowing down or overheating. Its exclusive two speed control when switched to hi-speed
produces 3200 rpm for fast, rough sanding. At low speed, the B-2 operates at 2800 rpm for fine, finish sanding.
A non marking disc guard protects the rubber pad, permitting the edger to work right up to the baseboard or wall.
Specifications
Voltage/Frequency 220V-240 /50-60 Hz
Amperage 6.5
Motor 1450W (1 HP)
Sound Level 91dB (A)
Vibration 5.7 m/s 2 rms
Abrasive Size 178mm x 22 mm Dia. (7" x 7/8" Dia.)
Disc Rate High 3200 RPM
Disc Rate Low 2800 RPM
Gears Hardened steel alloy pinion
and drive gear.
Bearings Sealed ball bearings,
lifetime lubricated.
Dust Collector Powerful vacuum fan, full
aluminum skirt
Power Cord 12m H07RN F3G 1.5mm 2
Dimensions 356 x 260 x 343mm (14 x 10½ x 13½)
Weight 14.5 kg (32 lbs)
Shipping Weight 21 kg (46 lbs)
Powerful Universal Motor
High Low Switch
Powerful Vacuum Fan for effecient dust pickup
Non-Marking Roller Guard
Non-Marking Swivel Type
Casters
Balanced Sanding Disc
for perfectly matched job
Aluminum Alloy Casting
Comfortable Operating
Handles
revised 5/10