4.
Fire hazard is dramatically cut. This makes the local Fire Marshall very happy. In
areas with tough fire inspection policies this can make the difference between being
allowed to operate, or being shut down.
Clark Foam has developed a vacuum system for the 2003 Model Planer. We also stock com-
ponents and supplies for vacuum systems. Our system and components are chosen carefully
for optimum vacuum efficiency, high productivity, and a neutral feel on the planer.
Also available is a current sensing device that turns on the vacuum when the planer is turned
on, and turns off the vacuum with an adjustable delay of up to 180 seconds. This is a very
important feature when using planers like the 2003 Model that have built in exhaust fans. If
you begin cutting with the vacuum turned off the vacuum hose will quickly jam. Planers like
the Skil 100 normally will not jam with the vacuum off.
MAINTAINING THE BRUSHES
The brushes are a well-known wear part on the planer. They are located on the right side of
the planer. There are two on the planer located opposite of each other. They are easy to check
and easy to replace using a medium size screwdriver. If a brush is worn to the point that the
motor will no longer run there could be serious damage to the main motor. Therefore it is
wise to periodically check one of the brushes. If the brush is worn to the mark approximately
1/4" from the end then both brushes should be replaced.
The brush wear is directly related to use so a calendar or board count can be used to predict
wear.
MAINTAINING THE TRIGGER
New planers come with a light lubrication on the trigger working mechanism.
From experience we know that the triggers periodically fail in the surfboard shaping envi-
ronment.
Prior to assuming the trigger has failed it is a good idea to check the brushes for they could be
the problem.
When taking the planer rear handle apart and putting it back together, be very careful of the
lower screw. The lower screw is all that is holding the bottom of the handle to the planer
housing.
Summary of Contents for 2003 Model Foam Planer
Page 1: ...CLARK FOAM PLANER 2003 MODEL SAFETY AND OPERATING INSTRUCTIONS Version 1 2003 ...
Page 4: ......
Page 13: ......
