Clarity C600 User Manual Download Page 26

Page: 26 / 32

Troubleshooting

The phone does not ring when you
receive a call:

¥ Make sure the RINGER switch on the

handset and base are set to ON.

¥ Verify the AC Adapter is securely

plugged into AC outlet, the base and
the telephone.

¥ Verify the telephone line cord is

securely plugged into the wall jack
and the telephone.

¥ Make sure you are in the usable

range of the base station.

¥ You may have too many extensions

on your line.Try unplugging a
few devices.

Noise, Static, Interference or Other Calls
Heard while Using the Handset:

¥ Try changing channels.

¥ Make sure the base antenna is in an

upright position.

¥ Make sure you are in the usable

range of the base station.

¥ Make sure the handset battery is

fully charged.

¥ Try relocating the base unit to

another location.

¥ Make sure the AC Adapter is not

plugged into the wall outlet with
other appliances.

The unit will not operate/no dial tone:

¥ Verify the TALK Button is lit.

¥ Verify the AC Adapter is securely

plugged into AC outlet, the base and
the telephone.

¥ Verify the telephone line cord is

securely plugged into the wall jack
and the telephone.

¥ Make sure the base antenna is in an

upright position.

¥ Make sure the handset battery is

fully charged.

¥ Verify the telephone is in the correct

dialing mode, tone (touch) or
pulse (rotary).

¥ Make sure you are in the usable

range of the base station.

¥ Reset the security code by placing the

handset in the base for 5-10 seconds.

Summary of Contents for C600

































Search results

Summary of Contents for C600

Reviews:

Related manuals for C600

Brands by name

Popular brands

Clarity C600, User Manual

Search results

Summary of Contents for C600

Reviews:

Related manuals for C600

Brands by name

Popular brands