22
FCC Part 68 Information
General Information:
a) This equipment complies with Part 68 of
FCC Rules and the requirements adopted by
the ACTA. On the bottom of this equipment is
a label that contains, among other information,
a product identifier in the format US:AAAE
Q##TXXXX. If requested, this information must
be provided to the telephone company.
b) A plug and jack used to connect this
equipment to the premises wiring and telephone
network must comply with the applicable FCC
Part 68 rules and requirements adopted by the
ACTA. A compliant telephone cord and modular
plug, RJ11C USOC. is provided with this prod-
uct. It is designed to be connected to a compati-
ble modular jack that is also compliant. See
installation instructions for details.
c) The REN is used to determine the number of
devices that may be connected to a telephone
line. Excessive RENS on a telephone line may
result in the devices not ringing in response to an
incoming call. In most but not all areas, the sum
of RENs should not exceed five (5.0). To be
certain of the number of devices that may be
connected to a line, as determined by the total
RENs, contact the local telephone company. For
products approved after July 23, 2001, the REN
for this product is part of the product identifier
that has the format US:AAAEQ##TXXXX. The
digits represented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3). For
earlier products, the REN is separately shown
on the label.
d) If this telephone equipment causes harm to the
telephone network, the telephone company will
notify you in advance that temporary discontinu-
ance of service may be required. But, if advance
notice isn’t practical, the telephone company will
notify the customer as soon as possible. Also, you
will be advised of your right to file a complaint
with the FCC if you believe it is necessary.
e) The telephone company may make changes in
its facilities, equipment, operations or procedures
that could affect the operation of the equipment.
If this happens the telephone company will
provide advance notice in order for you to
make necessary modifications to maintain unin-
terrupted service.
f) If trouble is experienced with this telephone
equipment, for repair or warranty information,
please contact Clarity at 1-800-552-3368.
If the equipment is causing harm to the network,
the telephone company may request that you dis-
connect the equipment until the problem is
resolved.
g) This telephone equipment is not intended to
be repaired and it contains no repairable parts.
Opening the equipment or any attempt to
perform repairs will void the warranty. For
service or repairs, call 1-800-552-3368.
h) Connection to party line service is subject to
state tariffs. Contact the state public utility
commission, public service commission or
corporation commission for information.
i) If your home has specially wired alarm
equipment connected to the telephone line,
ensure the installation of this telephone equipment
Federal Communications Commissions Requirements
UG060205_C410_RevA.qxd 6/15/05 8:03 PM Page 22
