VTM1
English
• Do not operate this product in any way other than described within this Owners Manual.
Failure to
follow the instructions within it will void your warranty.
• SAFETY FIRST! Do not install the display where it may
:
(i)
O
bstruct the driver’s vision
.
(ii)
I
mpair
the
performance of any of the vehicle’s operating systems or safety features, including airbags
.
(iii)
Impair the driver’s ability to safely operate the vehicle.
• When using th
is
system
always
make sure you are firmly secured by your seat belt
,
to ensure you do not
accidentally hit your head on the screen during sudden braking or other incidents. If you are ever in a
vehicle
accident, injuries can be more severe if
your
seat belt is not properly buckled.
• Installation or servicing of this product by persons without
suitable
training and experience in electronic
equipment and automotive accessories may be dangerous. Visit www.clarion.com.au
to find
your nearest
Authorised Clarion Dealer for professional installation
and support
.
• To avoid draining the battery it is
recommended
that you not use this product for extended periods
without
the vehicle engine running.
• Do not disassemble or alter this product in any way. Failure to observe this warning can cause
damage to
your product
and
will
void
your
warranty.
• Never clean the surface of the screen with a chemical solvent or a corrosive detergent.
Doing so
may cause permanent damage to the TFT LCD screen.
• Avoid installing this product under direct sunlight or near a hot air vent. Please note that its normal
working
temperature is from -5°C to +50°C. If the internal temperature of the vehicle is extremely high,
a short
cooling down period is necessary before operating the product.
• If the temperature inside the car is very low and the monitor is used soon after switching on the
heater,
moisture may form on the TFT LCD panel. Turn off the unit immediately! Failure to do so may
cause the
internal components to short
circuit
. Allow the unit to rest to allow the condensation to disappear
before
you continue operation.
• In extremely cold temperatures, movement of the picture may be slow and the image may
appear dark.
This is
typical of a TFT LCD and
not a malfunction
. Correct
operation
will resume once the
unit
reaches
its normal
operating temperature range.
• Do not drop or hit the TFT LCD panel with a hard object, as it may cause permanent damage.
Should the TFT LCD panel break, avoid touching the glass and/or fluid.
If you injure yourself as a
result
of
such contact clean the wound with plenty of water and seek immediate medical attention.
• Due to different vehicle specifications, please kindly ensure that the display monitor is properly
located
and not obstructing
any
air-conditioning vent
/s
.
• Avoid inserting any foreign objects into the slot of the disc player. Failure to observe this
will
void
your
warranty and cause damage to the mechanism of this unit.
• Protect your
Media
!
Heat & humidity can cause damage. Remove any USB Key, SD card and eject
any disc
from
your VTM1 before departing from your vehicle and store them away from
direct sun light.
•
It is also wise to close the LCD panel when you leave your vehicle to minimise possible screen damage.
•
During installation u
se the supplied screws to fix the
VTM1
Metal Mounting Plate.
Safety Information
CAUTION
VTM1
3
01-12-2010
